Hardwood Flooring

If your hardwood floors are worn and have lost their sheen, Let Yeshua
Hardwood Flooring
restore their appearance with a beautiful and smooth

The refinishing process includes sanding and scraping the floors down to
the natural wood. The process is very clean and dustless, since our
machines vacuum as they are sanding. Then, three coats of acrylic finish
are applied to the floors.

The first coat is applied after sanding. After approximately one hour and a
half, a buffing process is done, which is a light sanding. The second coat is
applied, giving it the same drying time and buffing process. - Buffing
between coats enables the floor to become very smooth once the last coat
is applied. - For the third coat, you can choose a high gloss, semi-gloss or
satin finish.

Approximately four hours after the last coat is applied, you are able to walk
on the area with socks and are also able to move furniture using felt
padding. (the furniture needs to be lift and placed on the designated area
and should not be drag across the floors.) Area rugs need to be lay down on
the finished area after seen days of the last coat.

Acrylic Finish
  • Environmentally safe
  • Odorless
  • Non-toxic
  • No bubbles or peeling
  • Scratch and dent resistant
  • Finish penetrates the wood yellowing
  • UV protection prevents yellowing
For I know the thoughts that I think toward you, says the Lord, thoughts of peace and not
of evil, to give you a future and a hope.  Jeremiah 29:11
© 2006 copyright by All rights reserved